the accumulative roll bonding (arb) as a severe plastic deformation (spd) procedure aimed at enhancing the mechanical properties of metals and alloys. in the present study, a new slab method is proposed for estimating the forming stress field for cold extrusion of metals cross the alumina interlayer powder particles by accumulative roll bonding process. plastic deformation behavior of the metal...

The accumulative roll bonding (ARB) as a severe plastic deformation (SPD) procedure aimed at enhancing the mechanical properties of metals and alloys. In the present study, a new slab method is proposed for estimating the forming stress field for cold extrusion of metals cross the alumina interlayer powder particles by accumulative roll bonding process. Plastic deformation behavior of the metal...

The accumulative roll bonding (ARB) as a severe plastic deformation (SPD) procedure aimed at enhancing the mechanical properties of metals and alloys. In the present study, a new slab method is proposed for estimating the forming stress field for cold extrusion of metals cross the alumina interlayer powder particles by accumulative roll bonding process. Plastic deformation behavior of the metal...

The small-angle scattering (SAS) structure functions are analyzed for an idealized, random two-phase system: a stationary arrangement of hard puzzle particles, separated by a relatively thin interspace, which can be approximated by an interlayer. The detailed shape of the interlayer is defined by the shape of the particles themselves: The starting point for producing these initial particles is ...

A discontinuously reinforced MMC containing 12 vol % Sic particles in an Al-Cu-Mg alloy (AA 2124) matrix has been diffusion bonded. Thick interlayers of different superplastic aluminium alloys (Al-Li 8090 and A1-Cu SUPRAL) were used to reduce the bonding pressure and ensure complete surface contact. Microstructural studies shown higher continuity in joints bonded with 8090 interlayer than with ...

A systematic study of the spin configuration of ferromagnetic(core)/antiferromagnetic(shell) nanocomposite particles was carried out by two approaches: micromagnetic and atomistic simulations. In the case of strong interlayer exchange coupling between ferromagnet and antiferromagnet, the micromagnetic simulation result is consistent with the atomistic simulation result. However, in the case of ...

We present extensive Monte Carlo simulations for the thermodynamic and structural properties of a planar bilayer of dipolar hard spheres for a wide range of densities, dipole moments, and layer separations. Expressions for the stress and pressure tensors of the bilayer system are derived. For all thermodynamic states considered, the interlayer energy is shown to be attractive and much smaller t...

poor adhesion between two successive bituminous layers causes adverse effects on the structural strength of the pavement and develops a numbers of premature failure. to improve the adhesion, it is a general practice to apply a tack coat over an existing or newly constructed bituminous surface before laying another bituminous layer. the main objective of this study is to explore the influence of...

This study demonstrated a method for toughening a highly crosslinked anhydride cured DGEBA epoxy using rubbery block copolymer grafted SiO2 nanoparticles. The particles were synthesized by a sequential reversible addition-fragmentation chain transfer (RAFT) polymerization. The inner rubbery block poly(n-hexyl methacrylate) (PHMA) had a glass transition temperature below room temperature. The ou...